LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Engine Control System - 1.4L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Remove the installation bolts, and then remove the ETC module (B) from the engine.
    G12977044Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the coolant hoses (A).
G12977045Courtesy of HYUNDAI MOTOR AMERICA