LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Charging System - 1.6L) >> Alternator >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
  2. Adjust the alternator belt tension after installation.

    (Refer to Engine Mechanical System - "DRIVE BELT ")

    Alternator Mounting Upper Bolt  :

    26.5 - 37.3 N.m (2.7 - 3.8 kgf.m, 19.5 - 27.5 Ib-ft)

    Alternator Mounting Low Bolt  :

    29.4 - 41.2 N.m (3.0 - 4.2 kgf.m, 21.7 - 30.4 Ib-ft)

    Alternator Brace Mounting Bolt  :

    24.3 - 26.9 N.m (2.48 - 2.74 kgf.m, 17.9 - 19.8 Ib-ft)