LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Manual Transaxle Control System - 1.6L) >> Shift Lever >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the shift lever knob & boots (A) after turning in the counter clock-wise direction.
    G12972053Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  3. Disconnect the select cable (B), after removing the snap pin (A).
    G12972054Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the shift cable.
    1. Remove the cable socket (A), after release the lock.
    2. Remove the clip, in the shape of a "U" (B), from the cable end by spreading it towards both sides.
    G12972055Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shift lever assembly (A) after removing the bolts.

    Tightening torque: 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)

G12972056Courtesy of HYUNDAI MOTOR AMERICA