LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System - 2.0L >> Engine Oil >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Check the engine oil quality.

    Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil.

  2. Check the engine oil level.

    After engine warm up stop the engine wait 5 minutes then check the oil level. Oil level should be between the "L" and "F" marks on the dipstick. If low check for leakage and add oil up to the "F" mark.

    NOTE:
    • Do not fill with engine oil above the "F" mark.

Selection Of Engine Oil 

Specifications: 

5W-20/API SM & ILSAC GF-4 (or above)/ACEA A5 (or above)

Information 

Allowed SAE Viscosity 

G12980642Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
  • For best performance and maximum protection of all types of operation, select only those lubricants which:

  1. Satisfy the requirement of the ILSAC (API) or ACEA classification.
  2. Have proper SAE grade number for expected ambient temperature range.
  3. Lubricants that do not have both an SAE grade number and ILSAC (API) or ACEA service classification on the container should not be used.