LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> Electrical >> Starter >> Engine Starting System - 2.0L >> Starter >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

  1. Disconnect the M-terminal (A) on the magnet switch assembly.
    G12980771Courtesy of HYUNDAI MOTOR AMERICA
  2. After loosening the screws (A), detach the magnet switch assembly (B).
    G12980772Courtesy of HYUNDAI MOTOR AMERICA
  3. Loosen the through bolts (A).
    G12980773Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the brush holder assembly (A), armature assembly (B) and yoke assembly (C).
    G12980774Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the gasket sheet (A) and lever stop (B).
    G12980775Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the reducer assembly (A) and lever (B).
    G12980776Courtesy of HYUNDAI MOTOR AMERICA
  7. Press the stopper (A) using a socket (B).
    G12980777Courtesy of HYUNDAI MOTOR AMERICA
  8. After removing the stop ring (A) using stop ring pliers (B).
    G12980778Courtesy of HYUNDAI MOTOR AMERICA
  9. Disconnect the stopper (A), overrunning clutch (B) and internal gear (C).
    G12980779Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Using a suitable pulling tool (A), pull the overrunning clutch stopper (C) over the stop ring (B).
    G12980780Courtesy of HYUNDAI MOTOR AMERICA
  10. Reassembly is the reverse of disassembly.