LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal >> Multi Link

Multi Link

  1. Loosen the wheel nuts slightly.

    Raise the vehicle, and make sure it is securely supported.

  2. Remove the rear wheel and tire (A) from the rear hub.

    Tightening torque: 

    107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)

    G12973458Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Be careful not to damage the hub bolts when removing the rear wheel and tire (A).
  3. Disconnect the rear wheel speed sensor connector (A).
    G12973459Courtesy of HYUNDAI MOTOR AMERICA
  4. Loosen the bolts (A) and then remove the hub bearing.

    Tightening torque: 

    88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb.ft)

    G12973460Courtesy of HYUNDAI MOTOR AMERICA
  5. To install, reverse the removal procedures.