| Main action |
|
- Faulty ESP (ESC)
- Variant coding is not finished.
- CAN Bus "OFF"
- A different type control module is installed.
|
| Threshold value |
- When variant coding is not complete
- After ignition switch is ON, if the CAN message for engine displacement, engine kind and T/M does not correspond to stored variant code in EEPROM.
- After ignition switch is ON, if there is no Optional Variant value stored in the EEPROM.
|
| Diagnosis time |
|
| MIL |
- ESP (ESC)/EBD/ABS warning lamps are activated.
|
| Reset condition |
- After performing variant coding normally.
|