Repair Procedures: Removal
- Make sure vehicle does not roll before setting shift lever to "N" position.
- Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
- Remove the ECM.
(Refer to Engine Control System - "ECM ")
- Disconnect the inhibitor switch connector (A).
- Remove the shift cable mounting nut (B).
- Remove the Manual Control Lever (A) and the washer after removing a nut (B).
- Remove the inhibitor assembly (A) after removing the bolts (B-2ea).