Repair Procedures: Removal
- Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
- Remove the rear seat cushion.
(Refer to Body - "REAR SEAT ASSEMBLY ")
- Remove the fuel pump service cover (A).
- Disconnect the fuel pump control module connector (A).
- Disconnect the fuel feed tube quick-connector (B).
- Disconnect the fuel pressure sensor connector (C).
- Disconnect the vapor tube quick-connector (D).
- Lift the vehicle.
- Remove the center muffler assembly.
- Disconnect the fuel feed hose (A) and leveling hose (B).
- Disconnect the vent hose (C).
- Disconnect the vapor tube quick-connector (A).
- Remove the side under cover (A).
- Remove the brake line bracket (A).
- Support the fuel tank with a jack.
- Remove the fuel tank from the vehicle after removing the mounting nuts (A).
NOTE:
- When removing the fuel tank, the fuel tank must be tilted because of interfering with coupling.