Repair Procedures: Inspection
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the fuel pump assembly.
- Check motor operation by fuel pump connector (A) connecting power (No. 2) and ground (No. 4).
Pin No Description 1 Fuel sender ground (-) 2 Fuel pressure sensor signal input 3 CAN [High] 4 Fuel pressure sensor power supply (+5V) 5 Fuel pressure sensor ground (-) 6 Fuel sender signal (+) 7 - 8 CAN [Low] 9 Ground (-) 10 Battery power (B+) - Also check that the resistance changes smoothly when the float is moved from "E" to "F".
| Position | Resistance (Ω) | Capacity (l ) |
|---|---|---|
| E | 298 - 305 | 3.9 |
| 1/2 | 84.5 - 88.5 | 25.3 |
| F | 13.5 - 16.5 | 49.0 |