LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra Eco >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System >> DC/DC Converter >> Repair Procedures >> Removal >> [200W]

Repair Procedures: Removal: [200W]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the crash pad center panel.

    (Refer to Body - "CENTER FASCIA PANEL ")

  3. Disconnect the DC/DC converter connector (A).
  4. Remove the DC/DC converter (B) after removing the nuts.
G12977222Courtesy of HYUNDAI MOTOR AMERICA