LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (4WD Control System Diagnosis) >> DTC U1121: Lost Communication With Electric Stability Program Module >> Wiring Inspection >> CAN Communication Line Check >> Check Short To Ground In CAN Communication Line

Check Short To Ground In CAN Communication Line

WARNING: This page is about a different variant/trim than selected.
  1. IG key "OFF".
  2. Measure resistance between CAN high terminal (#3) of diagnostic connector and chassis ground.
  3. Measure resistance between CAN low terminal (#11) of diagnostic connector and chassis ground.

    Specification:  ∞ Ω

  4. Is the measured value within specification?

    YES 

    • Check PCM, 4WD ECU, TCM and ESC ECM connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO