LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (4WD Control System Diagnosis) >> DTC U0122: Lost Communication With Vehicle Dynamics Control Module >> Wiring Inspection >> CAN Communication Line Inspection >> Check Short To Ground In CAN Communication Line

Check Short To Ground In CAN Communication Line

WARNING: This page is about a different variant/trim than selected.
  1. IG KEY OFF.
  2. Disconnect PCM, 4WD ECU, TCM and ABS connector.
  3. Measure resistnace between CAN high terminal (#3) of diagnostic connector and chassis ground.
  4. Measure resistance between CAN low terminal (#11) of diagnostic connector and chassis ground.

    Specification:  ∞ Ω

  5. Is the measured value within specification?

    YES 

    • Check PCM, 4WD ECU, TCM and ABS ECM connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO