LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (4WD Control System Diagnosis) >> DTC U0122: Lost Communication With Vehicle Dynamics Control Module >> Wiring Inspection >> CAN Communication Line Inspection >> Check Short To Battery In CAN Communication Line

Check Short To Battery In CAN Communication Line

WARNING: This page is about a different variant/trim than selected.
  1. IG Key "OFF".
  2. Disconnect PCM, 4WD ECU, TCM and ABS connector.
  3. IG KEY OFF
  4. Measure voltage between CAN high terminal (#3) of diagnostic connector and chassis ground.
  5. Measure voltage between CAN low terminal (#11) of diagnostic connector and chassis ground.

    Specification:  About 0V