LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Engine Control System - 2.4L) >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal
  2. Remove the intake manifold.

    (Refer to Engine Mechanical System - INTAKE MANIFOLD )

  3. Remove the knock sensor (A) after loosening the mounting bolt (B) from the cylinder block.
    G12612759Courtesy of HYUNDAI MOTOR AMERICA