LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 3) >> DTC U0109: Lost Communication With Fuel Pump Control Module >> Wiring Inspection >> Signal Circuit Inspection >> Check CAN Communication Line Open

Check CAN Communication Line Open

  1. IG "OFF". Disconnect the connectors related to the CAN communication.
  2. Measure resistance between High signal terminal of PCM and FPCM.
  3. Measure resistance between Low signal terminal of PCM and FPCM.

    Specification:  Approx. 0Ω

  4. Is the measured resistance within specification?

    YES 

    • Go to next step as below.

    NO