LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (1 Of 3) >> DTC P0136: O2 Sensor Circuit (Bank 1/Sensor 2) >> Wiring Inspection >> Ground Circuit Inspection >> Check Resistance

Check Resistance

  1. IG "OFF". Disconnect HO2S connector.
  2. Measure resistance between ground terminal of HO2S (B1/S2) harness connector and chassis ground.

    Specification:  Approx. 0Ω

  3. Is resistance within the specification?

    YES 

    NO 

    • Repair or replace as necessary and go to "Verification of Vehicle Repair " procedure.
      NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire(s). Do not attempt to repair the wire(s), connector, or the terminals.