LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.0L >> Fuel Pump >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable
  2. Remove the fuel pump assembly.
  3. Check motor operation by fuel pump connector (A) connecting power (No. 2) and ground (No. 4)
    G12610968Courtesy of HYUNDAI MOTOR AMERICA
    Pin No Description
    1 Fuel sender ground
    2 Fuel pressure sensor (FPS) signal input
    3 Fuel pressure sensor (FPS) ground (-)
    4 Ground
    5 CAN [Low]
    6 Fuel sender signal
    7 -
    8 Fuel pressure sensor (FPS) power supply(+5V)
    9 CAN [High]
    10 Battery power (B+)
  4. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
    Position Resistance (Ω) Capacity (l  )
    E 297 ~ 303 5.0
    1/2 80 ~ 84 31.5
    F 14 ~ 16 59.5