LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.0L >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable
  2. Disconnect the accelerator position sensor connector (A)
  3. Remove the installation bolt (B), the nuts (C) and then remove the accelerator pedal module.
    G12611014Courtesy of HYUNDAI MOTOR AMERICA