LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/ESC Diagnosis >> DTC C1702: Variant Coding Error >> DTC Inspection >> GDS Data Analysis >> Variant Coding (In Case That The GDS Is Connected To The Internet)

Variant Coding (In Case That The GDS Is Connected To The Internet)

  1. Connect GDS to Data Link Connector (DLC).
  2. IG "ON".
  3. Perform variant coding in Vehicle S/W Management menu of the GDS. (Fig.1)
  4. Fill in blanks with VIN number of the vehicle correctly. (Fig.2)
  5. Check whether current variant code corresponds to the options which are applied to the vehicle. (Fig.3)
  6. IG "OFF" and wait for about 10 seconds, and then IG "ON". Go to "VARIANT CODE RESET " Procedure.
    NOTE: In case that the state of HAC is enabled, operate "longitudinal G sensor Calibration" by GDS. (refer to C1285 )
    G12608003Courtesy of HYUNDAI MOTOR AMERICA
    G12608004Courtesy of HYUNDAI MOTOR AMERICA
    G12608005Courtesy of HYUNDAI MOTOR AMERICA