LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/ESC Diagnosis >> DTC C1237: Primary Pressure Sensor-Signal >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage Monitoring
  1. External noise
  2. Faulty pressure sensor
Enable Conditions
  • When the gradient of the sensor signal per 10 msec is larger than 15 bar when any control is not activated
  • After normal operation of brake light switch, If the pressure sensor signal is higher than 15 bar and brake light switch is low for 3 sec when any control is not activated, ECU detects the failure
  • During driving more than 40 km/h and stop 3 times, if master cylinder pressure is not changed, ECU detects the failure
Fail Safe
  • Inhibit the ESP(ESC)/DBC/AVH control and allow the ABS/EBD/ESP control
  • The ESP(ESC)/DBC/AVH warning lamp are activated