LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/ESC Diagnosis >> DTC C1114: 12V Sensor Power Fail >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to Data Link Connector (DLC).
  2. IG "ON" & ENG "ON".
  3. Monitor the "BATTERY VOLTAGE" parameter on the "Current Data  " menu of the GDS.

    Specification:  BATTERY VOLTAGE (Approx. 10V ~ 16V)

    G12607874Courtesy of HYUNDAI MOTOR AMERICA

    Fig.1) Normal Data at IG "ON"

  4. Is parameter displayed within specifications?

    YES 

    • Fault is intermittent caused by poor connection in power harness (IGN+) and/or HECU's connector or was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to next step.