LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Sonata Plug-In Hybrid Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System - General Information (PHEV) >> Special Service Tools

Special Service Tools

AUTOMATIC TRANSAXLE SYSTEM SPECIAL SERVICE TOOLS

Tool (Number and Name) Illustration Use
09200-3N000
Engine support fixture (Beam)
G12793339Courtesy of HYUNDAI MOTOR AMERICA
Removal and installation of the transaxle.
Use this beam (SST No.: 09200-3N000) with the supporter (SST No.: 09200-2S000).
*Permit operating with 09200-38001.
*Refer to the engine support fixture assembly drawing below.
09200-2S000
Engine support fixture (Supporter)
G12793340Courtesy of HYUNDAI MOTOR AMERICA
Removal and installation of the transaxle.
Use this beam (SST No.: 09200-38001/3N000) with the supporter (SST No.: 09200-2S000).
*Refer to the engine support fixture assembly drawing below.
09452-3D100
Oil seal installer
G12793341Courtesy of HYUNDAI MOTOR AMERICA
Installation of the differential oil seal in the transaxle case and housing side.
[Using with bar (SST No. 09231-H1100)]
09231-H1100
Bar
G12793342Courtesy of HYUNDAI MOTOR AMERICA
Installation of the differential oil seal in the transaxle case and housing side.
[Using with oil seal installer (SST No.:09452-3D100)]
09480-A3800
Inhibitor switch neutral fixed pin
G12793343Courtesy of HYUNDAI MOTOR AMERICA
When installing the manual control lever on the inhibitor switch, used to align the neutral position.

Engine support fixture special tool assembly drawing 

G12793344Courtesy of HYUNDAI MOTOR AMERICA