Repair Procedures: Removal
- Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
- Remove the rear seat cushion.
(Refer to "REAR SEAT ASSEMBLY ")
- Remove the fuel pump service cover (A) in the trunk.
- Disconnect the fuel feed tube quick-connector (A).
- Disconnect the fuel pressure sensor connector (B).
- Disconnect the fuel pump control module (C).
- Lift the vehicle.
- Remove the main buffer.
(Refer to "MUFFLER ")
- Support the fuel tank with a jack.
- Disconnect the fuel filler hose (A) and leveling hose (B).
- Disconnect the vapor hose quick-connector (A).
- Disconnect the fuel tank pressure sensor extension connector (A).
- Remove the fuel tank bands (A) installation nuts.
- Remove the fuel tank after removing the fuel tank band (A) as shown in the illustration below.