LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> Overdrive Clutch Control Solenoid Valve (OD/C_VFS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn OFF the ignition switch.
  2. Remove the battery and tray.
  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12025381Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure the resistance between solenoid valve signal terminal and ground terminal.
  5. Check that the measured resistance is within the specification.