LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> 35R Clutch Control Solenoid Valve (35R/C_VFS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12025324Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the measured resistance is within the specification. (Refer to - "SPECIFICATIONS ")