LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B1602-00: CAN Error >> W/Harness Inspection >> IPM Signal Circuit Inspection

IPM Signal Circuit Inspection

  1. Check CAN High Line
    1. IG "ON" & ENG "OFF".
    2. After connect GDS, select "Oscilloscope" mode.
    3. Measure the signal waveform on IPM CAN High line.

      Specification  : Refer to "SIGNAL WAVEFORM & DATA "

      Fig 1: Measuring Signal Waveform On IPM CAN High Line
      G10370745Courtesy of HYUNDAI MOTOR AMERICA
      Fig 2: CAN Terminals
      G10370746Courtesy of HYUNDAI MOTOR AMERICA
    4. Does the measured signal waveform follow the specification?

      YES 

      NO 

  2. Check CAN Low Line
    1. IG "ON" & ENG "OFF".
    2. After connect GDS, select "Oscilloscope" mode.
    3. Measure the signal waveform on IPM CAN Low line.

      Specification  : Refer to "SIGNAL WAVEFORM & DATA "

      Fig 3: Measuring Signal Waveform On IPM CAN Low Line
      G10370747Courtesy of HYUNDAI MOTOR AMERICA
      Fig 4: CAN Terminals
      G10370748Courtesy of HYUNDAI MOTOR AMERICA
    4. Does the measured signal waveform follow the specification?

      YES 

      NO