LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson SE, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - 2.4L >> Alternator >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).
    Fig 1: Identifying Alternator "B" Terminal, Air Compressor & Alternator Connectors
    G00547026Courtesy of HYUNDAI MOTOR CO.
  3. Remove the drive belt (A) after turning the drive belt tensioner (B) counter clockwise.
    Fig 2: Identifying Drive Belt & Tensioner
    G00547030Courtesy of HYUNDAI MOTOR CO.
  4. Pull out the through bolt and then remove the alternator (A).
    Fig 3: Identifying Alternator
    G00547034Courtesy of HYUNDAI MOTOR CO.