LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson SE, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - 2.4L >> Alternator >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

  1. Remove the alternator cover (A) using a screw driver after loosening the nuts (B).
    Fig 1: Alternator Cover & Nuts
    G00547038Courtesy of HYUNDAI MOTOR CO.
  2. Remove the slip ring guide (A) and then loosen the mounting bolts and disconnect the brush holder assembly (B).
    Fig 2: Identifying Slip Ring Guide & Brush Holder Assembly
    G00547042Courtesy of HYUNDAI MOTOR CO.
  3. Remove the pulley (A) using the SST (09373-27000) (B).
    Fig 3: Removing Pulley Using SST
    G00547046Courtesy of HYUNDAI MOTOR CO.
  4. Loosen the 4 through bolts (A).
    Fig 4: Identifying Alternator Bolts
    G00547050Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the rotor (A) and housing (B).
    Fig 5: Identifying Rotor And Housing
    G06873117Courtesy of HYUNDAI MOTOR CO.
  6. Reassembly is the reverse order of disassembly.