Cowl Cross Bar Assembly Replacement
- Remove the following items.
- Front seat. (Refer to FRONT SEAT .)
- Floor console. (Refer to CONSOLE .)
- Main crash pad assembly
- Cowl top cover. (Refer to COWL TOP COVER .)
- Disconnect the steering column connectors. (Refer to STEERING COLUMN AND SHAFT .)
- Down the steering column after loosening the mounting bolts. (Refer to STEERING COLUMN AND SHAFT .)
- Disconnect the blower unit connectors (A).
- Disconnect the passenger compartment junction box connectors.
- Disconnect the airbag (A) and antenna (B) connectors.
- Push the lock pin, disconnect the driver's wiring connectors.
- Using a screwdriver, remove the wiring cover (A).
- Push the lock pin, disconnect the passenger's wiring connectors.
- Using a screwdriver, remove the wiring cover (A).
- Disconnect the connector mounting clip (A).
[Driver's]
[Passenger's]
- Remove the cowl top cover. (Refer to COWL TOP COVER .)
- Loosen the mounting bolts.
- After loosening the mounting bolts and nuts, then remove the cowl cross bar (A).
- Installation is the reverse of removal.NOTE:
- Put on gloves to protect your hands.
- Make sure the connectors are plugged in properly.