LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Torque Converter Control Solenoid Valve (T/CON_VFS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove the battery and the battery tray.

    (Refer to "CHARGING SYSTEM ")

  2. Remove the under cover (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Under Cover
    G10255962Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the air cleaner assembly and air duct.

    (Refer to "AIR CLEANER ")

  4. Remove the battery and battery tray.

    (Refer to "BATTERY ")

  5. Remove the under cover.

    (Refer to "ENGINE ROOM UNDER COVER ")

  6. Remove the drain plug (A) and reinstall the drain plug after draining ATF totally.

    Drain plug tightening torque: 

    34.3 ~ 44.1 N.m (3.5 ~ 4.5 kgf.m, 25.3 ~ 32.5 lb-ft)

    Fig 2: Drain Plug
    G10255963Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Replace the gasket before reinstalling the drain plug.
  7. Disconnect the air breather hose (A) from the valve body cover after disconnecting the clamp (B).
    Fig 3: Air Breather Hose And Clamp
    G10255964Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the bolts (B).
  9. Remove the valve body cover (A).

    Tightening torque: 

    11.8 ~ 13.7 N.m (1.2 ~ 1.4 kgf.m, 8.7 ~ 10.1 lb-ft)

    Fig 4: Valve Body Cover And Bolts
    G10255965Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the bolts.
  11. Disconnect the solenoid valve connector (B) and the oil temperature sensor (A) from the valve body.

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 5: Solenoid Valve Connector And Oil Temperature Sensor
    G10255966Courtesy of HYUNDAI MOTOR AMERICA
  12. Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 6: Solenoid Valve Support Bracket And Valve Body Mounting Bolt
    G10255967Courtesy of HYUNDAI MOTOR AMERICA
  13. Remove the torque converter control solenoid valve (A).
    Fig 7: Torque Converter Control Solenoid Valve
    G10255968Courtesy of HYUNDAI MOTOR AMERICA