LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Cluster Replacement

Cluster Replacement

CAUTION:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the cluster fascia upper panel (A).
    Fig 1: Cluster Fascia Upper Panel
    G10254247Courtesy of HYUNDAI MOTOR AMERICA
  2. Using a screwdriver or remover, remove the shroud upper cover (A).
    Fig 2: Shroud Upper Cover
    G10254248Courtesy of HYUNDAI MOTOR AMERICA
  3. After loosening the mounting screws, then remove the cluster assembly (A).
    Fig 3: Loosening Cluster Assembly Mounting Screws
    G10254249Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the connector (A).
    Fig 4: Connector
    G10254250Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
    NOTE:
    • Make sure the connectors are connected in properly.
    • Replace any damaged clips.