LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Audio assembly Replacement

Audio assembly Replacement

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the crash pad center garnish (A).
    Fig 1: Crash Pad Center Garnish
    G10254258Courtesy of HYUNDAI MOTOR AMERICA
  2. After loosening the mounting screws, then remove the center fascia panel (A).
    Fig 2: Loosening Center Fascia Panel Mounting Screws
    G10254259Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector (A).
    Fig 3: Connector
    G10254260Courtesy of HYUNDAI MOTOR AMERICA
  4. After loosening the mounting screws, then remove the audio assembly (A).
    Fig 4: Loosening Audio Assembly Mounting Screws
    G10254261Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the connectors.
    Fig 5: Connectors
    G10254262Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal.
    NOTE:
    • Make sure the connectors are connected in properly.
    • Replace any damaged clips.