LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Console >> Repair procedures >> Replacement >> Floor Console Replacement >> [M/T]

Floor Console Replacement: [M/T]

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the crash pad center garnish (A).
    Fig 1: Crash Pad Center Garnish
    G10254225Courtesy of HYUNDAI MOTOR AMERICA
  2. Using a screwdriver or remover, remove the gear boot (A).
    Fig 2: Gear Boot
    G10254226Courtesy of HYUNDAI MOTOR AMERICA
  3. After loosening the mounting screws, then remove the console upper cover (A).
    Fig 3: Removing Console Upper Cover
    G10254227Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the connectors (A).
    Fig 4: Connectors
    G10254228Courtesy of HYUNDAI MOTOR AMERICA
  5. Using a screwdriver or remover, remove the parking brake cover (A).
    Fig 5: Parking Brake Cover
    G10254229Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the console tray mat (A).
    Fig 6: Console Tray Mat
    G10254230Courtesy of HYUNDAI MOTOR AMERICA
  7. After loosening the mounting screws and bolts, then remove the floor console assembly (A).
    Fig 7: Loosening Floor Console Assembly Mounting Screws And Bolts
    G10254231Courtesy of HYUNDAI MOTOR AMERICA
  8. After loosening the mounting screw, nut, clip, then remove the console side cover (A).
    Fig 8: Loosening Console Side Cover Mounting Screw, Nut And Clip
    G10254232Courtesy of HYUNDAI MOTOR AMERICA
  9. Disconnect the connector (A).
    Fig 9: Connector
    G10254233Courtesy of HYUNDAI MOTOR AMERICA
  10. Installation is the reverse of removal.
    NOTE:
    • Make sure the connectors are connected in properly.
    • Replace any damaged clips.