LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra Coupe Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module >> Description and Operation >> Function >> Seat belt reminder (Driver seat)

Seat belt reminder (Driver seat)

Fig 1: Seat Belt Reminder Communication Diagram (Driver Seat)
G10254647Courtesy of HYUNDAI MOTOR AMERICA
  1. From IGN1 switch ON, Warning lamp for 1sec (DUTY 50%) and Chime buzzer for 6 time every 1sec. (in case of S/BELT unfastened state) But, within 6sec in the S/BELT fastened, the Chime buzzer output is stop, and Warning lamp is the remaining time.
  2. Lamp and Chime buzzer become output stop when IGN1 is turned OFF within 6sec-output.
  3. If vehicle speed over 10Km/h, Warning lamp and Chime buzzer will operate when Seat belt unfastened after IGN ON.
  4. If vehicle speed below 5Km/h or IGN OFF or seat belt fastened, the pattern is stopped.
  5. Seat belt fastened→unfastened when IGN1=ON state: if vehicle speed over 10Km/h, 1time output. And if vehicle speed 5~10Km/h, Warning lamp for 1sec (DUTY 50%) and Chime buzzer for 6 every 1s. If vehicle speed less than 5Km/h, Warning lamp for 6 every 1sec (DUTY 50%)