LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Oil Cooler >> Repair Procedures >> Installation [2.4L Engine Only]

Installation [2.4L Engine Only]

  1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then Install the oil cooler with fix bolt (B).

    Tightening torque: 

    44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

    Fig 1: Locating Oil Cooler Packing Surface And Fix Bolt
    G06873067Courtesy of HYUNDAI MOTOR CO.
    CAUTION: Fix position of oil cooler stopper (A) where oil cooler resists on ladder frame stopper (B).
    Fig 2: Identifying Oil Cooler Stopper And Ladder Frame Stopper
    G06873068Courtesy of HYUNDAI MOTOR CO.
  2. Apply a light coat of engine oil to the oil filter packing surface (A), and then install the oil filter.

    Tightening torque: 

    11.8 ~ 15.7 N.m (1.2 ~ 1.6 kgf.m, 8.7 ~ 11.6 lb-ft)

  3. Connect the oil cooler coolant hoses (B).
    Fig 3: Identifying Oil Cooler Coolant Hoses
    G06873069Courtesy of HYUNDAI MOTOR CO.
  4. Fill the radiator with coolant and check for leaks.