LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Azera >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-rate and G Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the floor console.

    (Refer to "FLOOR CONSOLE ")

  3. Disconnect the yaw rate & lateral G sensor connector (A).
    Fig 1: Identifying Yaw Rate & Lateral G Sensor Connector
    G08810475Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the mounting bolts (B).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

  5. Installation is the reverse of removal.