LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Azera >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> Failure Diagnosis >> ABS Does Not Operate >> Inspection Procedures >> Check The Ground Circuit

Check The Ground Circuit

  1. Disconnect the connector from the ESC control module.
  2. Check for continuity between terminals 13, 38 of the ESC control module harness side connector and ground point.
    Fig 1: Checking For Continuity Between Terminals
    G08810452Courtesy of HYUNDAI MOTOR AMERICA
  3. Is there continuity?

    YES 

    • Check the wheel speed sensor circuit.

    NO 

    • Repair an open in the wire and ground point.