LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel Module Diagnosis >> DTC B1699: CAN timeout between IPM and AVAVN >> Component Inspection

Component Inspection

Check internal errors of CAN communication units.

  1. Connect GDS.
  2. IG "ON" and engine "OFF".
  3. Select "DTC Analysis" mode.
  4. Replace AV/AVN with the new one and check DTC again.
    Fig 1: Checking Internal Errors Of CAN Communication Units
    G08812882Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: ECM And TCM Connector Terminal Layout
    G08812883Courtesy of HYUNDAI MOTOR AMERICA

    *CAN communication units: IPM (Inter Panel Module), CLU (Cluster), SMK (Smart Key), HU (Head Unit).

  5. Is the code erased?

    YES 

    Substitute with a known - good unit and check for proper operation. If the problem is corrected, replace the unit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.