LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Inspection Chart For Diagnostic Trouble Codes (DTC) >> P0708: Transmission Range Sensor Circuit High Input >> DTC Detecting Condition

P0708: Transmission Range Sensor Circuit High Input: DTC Detecting Condition

P0708 TRANSMISSION RANGE SENSOR CIRCUIT HIGH INPUT

Item Detecting Condition Possible Cause
DTC Strategy
  • Circuit high
  • Open or short in TRANSAXLE RANGE SWITCH
  • Faulty Shift cable adjustment
  • Faulty Inhibitor switch and Manual control lever position adjustment
  • Faulty TRANSAXLE RANGE SWITCH
  • Faulty PCM
Enable Conditions
  • Ignition key input voltage ≥ 10 V
Threshold Value
  • Multiple signal
Diagnostic Time
  • More than 10 sec
Fail Safe
  • Recognition as previous signal
    • When signal is input "D" and "N" at the same time. TCM regards it as "N" RANGE.
    • After PCM/TCM Reset, If the if the PCM/TCM detects multiple signal or no signal, then it holds the 3rd gear position.