LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Azera >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Radiator Hose >> Repair Procedures >> Removal and Installation

Removal and Installation

  1. Remove the battery and tray.

    (Refer to "BATTERY ")

  2. Remove the air duct and air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Drain the coolant.

    (Refer to Cooling System - "COOLANT ")

  4. Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).

    Tightening torque:  3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Fig 1: Identifying Upper Hose Clip Fixing Bolt, Radiator Upper Hose And Lower Hose
    G08809341Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: When installing radiator hoses, install as shown in illustrations.
    Fig 2: Identifying Radiator Hoses Installation Positions
    G08809342Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is reverse order of removal.