LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GL >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Repair procedures >> Removal >> Oil Pan

Oil Pan

  1. Drain the engine oil.
  2. Disconnect the rear oxygen sensor connector (A).
    Fig 1: Identifying Rear Oxygen Sensor Connector
    G06879218Courtesy of HYUNDAI MOTOR CO.
  3. Remove the front muffler heat protector (A)
  4. Remove the front muffler (B).
    Fig 2: Identifying Front Muffler Heat Protector And Front Muffler
    G06879219Courtesy of HYUNDAI MOTOR CO.
  5. Remove the exhaust manifold and catalytic converter assembly (A).
    Fig 3: Identifying Exhaust Manifold And Catalytic Converter Assembly
    G06879220Courtesy of HYUNDAI MOTOR CO.
  6. Using the SST (09215-3C000) and remove the oil pan.
    Fig 4: Removing Oil Pan Using SST (09215-3C000)
    G06879221Courtesy of HYUNDAI MOTOR CO.
    CAUTION:
    • Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.
    • After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
    • Do not turn over the SST abruptly without tapping. It can be result in damage of the SST.