LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC P0626: Generator Field F Terminal Circuit High >> Inspection Repair >> W/Harness Inspection >> Control Circuit Inspection

Control Circuit Inspection

  1. With ignition OFF, disconnect alternator connector.
  2. Ignition "ON" & Engine "OFF".
  3. Measure voltage between terminals 3 of the alternator harness connector and chassis ground.

    Specification:  Approx. 9~10V

    Fig 1: Measuring Voltage Between Alternator Harness Connector Terminal 3 And Chassis Ground
    G06856468Courtesy of HYUNDAI MOTOR CO.
  4. Is voltage within the specification?

    YES 

    • Go to next step as below.

    NO