LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC P0300: Random Multiple Cylinder Misfire Detected >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSE

Item Detecting Condition Possible Cause
DTC Strategy
  • Calculation of engine roughness
  • Faulty spark plugs, high-tension lead, or Ignition coil
  • Incorrect valve timing
  • Uneven compression
  • Air leakage
  • Improper Fuel pressure or dirty fuel.
  • Blocked/Leaking injectors
  • Leakage between cooling system and cylinder
Enable Conditions
  • 170 < Mass air flow(mg/rev.) < 460
  • 512 < Engine speed(RPM) < 6500
  • 40 < MAF gradient(mg/rev/Seg.) < 400
  • 140 < Throttle gradient(°TPS/sec.) < 200
  • Coolant temperature > 20°C (-4°F) if Start temperature < - 7°C (19.4°F)
  • No rough road
  • No relevant failure
  • 11V< Battery voltage
  • Fuel cut off not active
Threshold Value
  • Misfire detected on 2 or more cylinders
MIL On Condition
  • When misfire rate is high enough to damage the catalyst : Immediate
  • When emissions level to exceed standard value : 2 Driving Cycles