LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC P0077: Intake Valve Control Solenoid Circuit-High (Bank 1) >> Inspection Repair >> W/Harness Inspection >> Control Circuit Inspection

Control Circuit Inspection

  1. Ignition "ON" & Engine "OFF"
  2. Measure voltage between terminal 1 of the oil control valve harness connector and chassis ground.

    Specification  : Approx. 3~4V

    Fig 1: Measuring Voltage Between Terminal 1 Of Oil Control Valve Harness Connector And Chassis Ground
    G06856066Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Signal Waveform Of Oil Control Valve
    G06856067Courtesy of HYUNDAI MOTOR CO.
    NOTE: Signal waveform in control circuit with ignition ON & Engine OFF
  3. Is voltage within the specification?

    YES 

    NO