LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Description and Operation >> Pattern State >> Tail Lamp Auto Cut

Tail Lamp Auto Cut

  1. TAIL RELAY is turned ON when changing TAIL SW from OFF to ON.
  2. TAIL RELAY is turned OFF when TAIL SW is OFF.
  3. TAIL RELAY is turned OFF if the state is changed from KEY IN SW ON and TAIL SW ON to KEY IN SW OFF, TAIL SW ON and Dr DOOR OPEN. (automatic light out)
  4. TAIL RELAY is turned ON when KEY IN SW is turned ON after the operation in (3).
  5. TAIL RELAY is not turned ON if Dr DOOR is closed after the operation in (3).
  6. The previous MODE is held at BATTERY ON/OFF after the operation in (3).
    Fig 1: Tail Lamp Auto Cut - Signals
    G06864353Courtesy of HYUNDAI MOTOR CO.