LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> Body Control - Power Seat Module >> B1955 Recline Motor Or Sensor Error >> Inspection Repair >> W/Harness Inspection >> Power Supply Circuit Inspection

Power Supply Circuit Inspection

■ Motor Power circuit Inspection 

  1. Check for open in harness
    1. Ignition "OFF"
    2. Disconnect power seat recline motor.
    3. Measure resistance between terminal "A2" of IMS and terminal "5" of power seat recline motor.
    4. Measure resistance between terminal "A1" of IMS and terminal "2" of power seat recline motor.

      Specification  : Approx. 0 Ω

      Fig 1: Measuring Resistance Between Terminal A1 Of IMS And Terminal 2 Of power seat Recline Motor
      G06805686Courtesy of HYUNDAI MOTOR CO.
    5. Is the measured resistance within specifications?

      YES 

      • Go to  2 "Check for short in harness" procedure.

      NO 

  2. Check for short in harness
    1. Ignition "OFF"
    2. Disconnect power seat recline motor.
    3. Measure resistance between terminal "2" of power seat recline motor and chassis ground
    4. Measure resistance between terminal "5" of power seat recline motor and chassis ground

      Specification  : Approx. ∞ Ω

      Fig 2: Measuring Resistance Between Terminal 2 And 5 Of power seat Recline Motor And Chassis Ground
      G06805687Courtesy of HYUNDAI MOTOR CO.
    5. Is the measured resistance within specifications?

    YES 

    • Go to  1 Sensor Power circuit Inspection procedure.

    NO 

■ Sensor Power circuit Inspection 

  1. Ignition "OFF"
  2. Disconnect power seat recline motor.
  3. Measure voltage between terminal "3" of power seat recline motor and chassis ground

    Specification  : Approx. 5V

    Fig 3: Measuring Voltage Between Terminal 3 Of power seat Recline Motor And Chassis Ground
    G06805688Courtesy of HYUNDAI MOTOR CO.
  4. Is the measured voltage within specifications?

    YES 

    NO