LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Accent GLS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC P0620: Alternator Control Circuit >> Wiring Inspection >> C Terminal Circuit Inspection

C Terminal Circuit Inspection

  1. With Ignition OFF, disconnect Alternator connector
  2. IG KEY "ON" & ENG "OFF"
  3. Measure voltage between C terminal of the Alternator harness connector and chassis ground.

    Specification:  Approx. 3.6V

  4. Is voltage within the specification?

    YES 

    • Go to "COMPONENT INSPECTION" procedure.

    NO 

    • Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR" procedure.