LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Veracruz GLS, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> ESC (Electronic Stability Control) System >> Esp/ESC System >> DTC C1283 Yaw Rate & Lateral G Sensor-Signal >> Monitor Scan Tool Data

Monitor Scan Tool Data

  1. Connect scan tool to Data Link Connector (DLC)
  2. Ignition "ON" & Engine "OFF".
  3. Monitor the "Lateral G Sensor, Yaw Rate Sensor" parameter on the Scan tool.

    Specification : Lateral G Sensor: approx. ± 0.0 G, YAW Rate Sensor :approx. ± 0.0 deg/s

    Fig 1: Monitoring Lateral G Sensor And Yaw Rate Sensor Parameter
    G05331495Courtesy of HYUNDAI MOTOR CO.
  4. Is parameter displayed within specifications?

    YES: 

    • Fault is intermittent caused by poor connection in Yaw Rate & Lateral G sensor harness and/or HECU's connector or was repaired and HECU memory was not cleared.

      Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

      Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO: