LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Veracruz GLS, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC P169A SMARTRA Authentication Fail >> Component Inspection

Component Inspection

  1. Check SMARTRA
    1. IGN "ON" & Engine "OFF"
    2. Neutralize "SMARTRA" and Register transponder key by scan tool.
      NOTE: Pin code is required to Neutralize SMARTRA and to Register transponder key
    3. Are Neutralizing and Registering completed normally ?

    YES 

    • Perform all the key teaching procedure with scan tool. (All the keys must be retaught) and then, go to "VERIFICATION OF VEHICLE REPAIR " Procedure.
      NOTE: Never change the password after SMARTRA is neutralized with scan tool Otherwise, Virgin TP only possible to register.

    NO 

    • Substitute with a known-good SMARTRA and check for proper operation.

      If the problem is corrected, replace SMARTRA and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.